Your Position: Home Page >> Tungsten Carbide >> Cemented Carbide >> Cemented Carbide Dies>>Cemented Carbide Drawing Dies

Cemented Carbide Drawing Dies Application

Cemented Carbide Drawing Dies
cemented-carbide-drawing-dies cemented-carbide-drawing -dies
Grade Application
YL01 MA10 Used for the high-speed stretching of steel wire, tungsten wire, molybdenum wire, etc. with a diameter of less than 1.5mm and non-ferrous metal with a high requirement of surface condition.
YL05.1 Used for the high-speed stretching of steel wire, tungsten wire, molybdenum wire, etc. with a diameter of less than 3mm and non-ferrous metal with a high requirement of surface condition.
YL10.2 Used for the high-speed stretching of steel wire, tungsten wire, molybdenum wire, etc. with a diameter ranging from 1.5mm to 10mm and non-ferrous metal with a high requirement of surface condition.
YG6 MA30 Used for the stretching of steel wire, non-ferrous wire and their alloy wire with diameter less than 20.0mm in the large press condition; also suitable for the stretching of metal tube with diameter less than 10mm.
YG6X Used for the stretching of steel wire, non-ferrous wire and their alloy wire and rod with the requirement of high wear resistance.
YG8 MZ30A Used for the stretching of steel wire, non-ferrous wire and their alloy wire with diameter less than 50.0mm; also suitable for the stretching of metal tube with diameter less than 35mm in the large press condition.
YG11 Used for the stretching of steel wire, non-ferrous wire and their alloy wire with diameter less than 60.0mm; also suitable for the stretching of metal tube with diameter less than 35mm in the large press condition.
YG15 Used for the stretching of steel bar, steel tube, alloy steel bolt and Rivet upsetting under the the condition of high pressure.
YRL10 Used for the stretching of steel bar, steel tube under the the condition of high pressure.